This brake relay traction valve is a critical component in the air brake system of Volvo trucks, controlling air flow to the brake chambers for smooth and responsive braking. Manufactured to high standards, it ensures consistent air pressure modulation, unlike a worn valve that might leak or respond slowly. Operators may notice delayed brake application, reduced braking effectiveness, or air leaks if this valve is faulty.
Always verify with serial number before ordering.
Parts Trading Company · Mumbai, Est. 1956 · Same-day dispatch · Ships worldwide · GST invoice included
From the same category — may also be needed
Full shipping information on regional pages · Air freight 2–12 days · GST invoice for India
Flush hydraulic lines before fitting new components. Use only manufacturer-specified hydraulic fluid. Check O-rings and backup rings for correct orientation. Bleed air from system after installation.
Always consult the OEM service manual for model-specific torque values and procedures. WhatsApp our technical team if you need fitment guidance.
The first symptom of a failing brake relay traction valve is often a noticeable delay in brake response when the pedal is applied. If the problem persists, braking effectiveness will diminish, and the truck may pull to one side during braking. In severe cases, the air system may not hold pressure, leading to a significant reduction in stopping power.
Ensure all air lines are properly disconnected and reconnected to the correct ports on the new valve to avoid air leaks. Check for any kinks or damage in the air lines before and after installation.
Inspect the air dryer and air tanks for moisture and debris, and check all other air system valves for proper operation.