This is a premium oil filter designed to maintain the cleanliness and lubrication quality of the engine oil in your Volvo truck or excavator. It is manufactured to precise specifications, ensuring effective removal of wear-causing particles that a degraded filter would allow to circulate. Operators may observe increased oil pressure, engine knocking sounds, or a rapid darkening of the engine oil when this filter is failing.
Always verify with serial number before ordering.
Parts Trading Company · Mumbai, Est. 1956 · Same-day dispatch · Ships worldwide · GST invoice included
From the same category — may also be needed
Full shipping information on regional pages · Air freight 2–12 days · GST invoice for India
Never run an engine without a filter — even briefly causes abrasive damage. Pre-fill fuel filters with clean fuel before fitting to reduce prime time. Replace O-rings on filter housings every second service. Record change dates on filter housing.
Always consult the OEM service manual for model-specific torque values and procedures. WhatsApp our technical team if you need fitment guidance.
A failing oil filter can initially cause the engine oil to darken more rapidly than usual, indicating poor filtration. If the filter becomes completely clogged, the bypass valve will open, allowing unfiltered oil to circulate, leading to increased friction and wear on engine components. This can ultimately result in severe internal engine damage and premature failure.
Always lubricate the rubber gasket on the new oil filter with a thin film of clean engine oil before installation to ensure a proper seal. Hand-tighten the filter until the gasket contacts the mounting surface, then tighten an additional 3/4 to 1 full turn, or as specified by the manufacturer.
Check the engine oil level and condition, and inspect the oil pan and drain plug for any signs of leaks or damage when changing the oil filter.