This is a high-performance oil filter engineered to remove contaminants from the engine oil, maintaining lubrication integrity and protecting vital engine components. It features a robust filtration media with a high capacity for trapping wear particles and sludge, ensuring cleaner oil than a depleted or damaged filter. Operators may observe increased engine noise, oil pressure warnings, or a rise in oil temperature if this filter is compromised.
Always verify with serial number before ordering.
Parts Trading Company · Mumbai, Est. 1956 · Same-day dispatch · Ships worldwide · GST invoice included
From the same category — may also be needed
Full shipping information on regional pages · Air freight 2–12 days · GST invoice for India
Never run an engine without a filter — even briefly causes abrasive damage. Pre-fill fuel filters with clean fuel before fitting to reduce prime time. Replace O-rings on filter housings every second service. Record change dates on filter housing.
Always consult the OEM service manual for model-specific torque values and procedures. WhatsApp our technical team if you need fitment guidance.
A clogged oil filter will initially lead to a reduction in oil flow and pressure, potentially causing the oil pressure warning light to illuminate. If ignored, the engine may start to run hotter due to inadequate lubrication, and internal components will experience increased friction and wear. The long-term consequence is accelerated engine degradation and potential mechanical failure.
Always lubricate the rubber gasket with clean engine oil before installation to ensure a proper seal and prevent leaks. Hand-tighten the filter until the gasket contacts the mounting surface, then tighten an additional 3/4 to 1 full turn.
When replacing the oil filter, always perform an oil change and inspect the drain plug and gasket for wear.